19010 Installation to the source directory is not permitted.
19011 The specified directory could not be created.
19012 \nThere is not enough free space on the drive.\n\n\n Space Required: %10lu bytes \n\n Space Available: %10lu bytes\n\n Space Needed: %10lu bytes\n\n
19013 InstallationInfo Isn't Working
19014 PowerQuest Drive Image Setup
19015 PowerQuest Drive Image 3.0
19016 Would you like to continue, even though the serial number you have entered is not valid?
19017 This program requires VGA or better resolution.
19018 SyQuest Drivers
19019 Invalid Product Serial Number
19020 Please enter your serial number. Your Drive Image serial number is printed on the serial number sticker.
19021 The Serial Number you specified is not valid. Please make sure you typed the correct number of letters and digits, including the dash.
19022 Enter Serial Number
19023 Disk Usage Warning
19024 \nThere is not enough free space on the diskette.\n\n\n Space Required: %10lu bytes \n\n Space Available: %10lu bytes\n\n Space Needed: %10lu bytes\n\n
19025 Invalid Directory Path Entered
19026 EIDE Support
19027 IEPP Support
19028 SCSI Support
19029 SEPP Support
19030 Please make sure diskette 1 of 4 is inserted.
19031 Create Bootable Diskette
19032 An unexpected error occurred!
19033 Bootable Diskette Created
19034 Diskette is not Accessible.\n\nThe device is not ready.
19035 The diskette is write-protected.\n\nRemove the write-protection or use another diskette.
19036 REM Load SyQuest
19037 PowerQuest recommends the creation of a bootable diskette and a Drive Image program diskette.\n\nWould you like to create these diskettes?
19038 User Information Unavailable
19039 No User Information is available for Windows 3.1.
19040 Selecting this component installs support for SyQuest removable media drives. Please select the correct drive type from the list at the right.
19041 Selecting this component installs support for all SyQuest EIDE drives.\n(SparQ, SyJet, EZ230, EZ135, SQ3270, and SQ3105)
19042 Selecting this component installs support for all SyQuest SCSI drives.\n(SyJet, EZ230, SQ3270, SQ3105, SQ200, SQ88, and SQ44)
19043 Selecting this component installs support for all SyQuest parallel port drives.\n(SparQ and EZFlyer 230 EIDE)
19044 Selecting this component installs support for the SyQuest SyJet parallel port drive.
19045 This is not a floppy drive.\n\nPlease select a floppy drive.
19046 License Agreement Confirmation
19047 Please note: You agree to use the software only in connection with a hard drive(s) that is permanently attached to ONE specific computer.
19048 Insert Blank Formatted Diskette
19049 Please insert a blank formatted 1.44 MB (3.5") diskette.
19050 Transferring files to diskette...
19051 REM Load Fujitsu
19052 File transfer complete.
19053 Invalid Entry
19054 You must type YES to indicate your acceptance of the license agreement.\n\nIF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS, PRESS CANCEL TO TERMINATE THE INSTALLATION.
19055 Please insert a formatted 1.44 MB (3.5") diskette.
19056 Insert Formatted Diskette
19057 PowerQuest recommends the creation of a bootable diskette and a Drive Image diskette.\n\nWould you like to create these diskettes?
19058 Uninstall Drive Image
19059 Important Information
19060 %P Setup is now complete.\n\nWould you like to view the README file?
19061 Yes, I want to view the README file.
19062 Create Diskette
19063 16-Bit Diskette
19064 32-Bit Diskette
19065 Pro Setup
19066 Format Diskette
19067 On Windows NT, Drive Image must be installed to a FAT Partition and can only be run after booting to DOS. If you do not have DOS, the Create Rescue Diskettes option will allow you to create a bootable diskette and a Drive Image diskette.
19068 Create MagicMover Diskette\n for Windows 3.1
19069 Create MagicMover Diskette\n for Windows 95 and NT
19070 Create Rescue Diskettes
19071 Drive Image Diskette Created
19072 yes
19073 MagicMover Diskette Created
19074 OS must be Windows 95 or Windows NT.
19075 Please remove and label the Diskette.
19076 Diskette Complete
19077 Copying PQDI.rtc File
19078 PowerQuest Drive Image 3.0 Pro
19079 Once the software has been used on ONE specific computer it may not be used on any additional computers without purchasing additional licenses.
19080 \n\nTo purchase additional licenses, contact PowerQuest at 1.800.379.2566.\n\nTo indicate your acceptance of this software license agreement type YES in the blank field below and press Enter.
19081 Installation Options
19082 Select one of the following options:
19083 \nInstall Drive Image
19084 \nInstall MagicMover
19085 Create Diskettes
19086 \nDisplay Technical Support Helps
19087 \nCreate Bootable Drive Image Diskette
19088 \nCreate MagicMover Diskettes
19089 Create MagicMover Diskette
19090 \nCreate Diskette for Windows 95 and NT
19091 \nCreate Diskette for Windows 3.1
19092 Technical Support Help
19093 PowerQuest Web Site
19094 \nDisplay User Information
19095 \nDisplay System Information
19096 Progress Bar
19097 To FORMAT: Follow instructions on the Progress Bar.
19098 To Format: Press Start and then Close when finished.
19099 To Copy System Files: Follow instructions on the Progress Bar.
19100 To Copy System: Press Start and then Close when finished.
19101 Unable to perform fileset.
19102 Enter User Information
19103 Please enter your serial number. Your Drive Image serial number is printed on the serial number sticker.
19104 Diskette Not Formatted
19105 Diskette has not been formatted. Diskette must be formatted to continue.\n\nWould you like to format the diskette?
19106 System Files Not Transferred
19107 System Files have not been transferred. System Files must be transferred to create a bootable diskette.\n\nWould you like to transfer System Files?
19108 To create this disk set, you will need two blank formatted diskettes.
19109 To create this disk set, you will need two blank formatted diskettes.\n\nPlease follow the instructions displayed on the Progress Bar.
19110 Unable to specify Root Key for registry.
19111 Create Drive Image Diskettes
19112 Registered Online:
19113 User Information
19114 The information below was obtained from the registry:
19115 Name:
19116 Company:
19117 Software:
19118 Version:
19119 Serial Number:
19120 System Information
19121 The information below describes your system:
19122 Windows 3.10 (Win32s)
19123 Windows 3.10
19124 Windows 3.11 (Win32s)
19125 Windows 3.11
19126 Windows for Workgroups 3.11 (Win32s)
19127 Windows for Workgroups 3.11
19128 Windows NT 3.50
19129 Windows NT 3.51
19130 Windows NT 4.0
19131 Windows 95
19132 OS:
19133 Unknown
19134 CPU:
19135 Base Memory: %d K
19136 Extended Memory: %d bytes
19137 Video:
19138 InstallShield Type: %d-Bit
19139 BIOS: %s %d
19140 CD-ROM: %s, %s
19141 CD-ROM: %s
19142 Click Next to continue.
19143 Yes, I would like to create these diskettes.
19144 Would you like to reformat the diskette?\n\n*** If you reformat all data will be lost. ***
19145 This diskette can only be created from the original CD.
19146 Select Drivers To Install
19147 REM Load Iomega Zip & Jaz drivers
19148 Iomega Drivers
19149 Selecting this component installs support for the Iomega Jaz and Zip drives.
19150 First call to BatchGetFileName failed.
19151 Upgrade Installation Error
19152 Cannot Set RUNPQDI.BAT as Default Batch File.
19153 AUTOEXEC.BAT not found.
19154 REM Run Drive Image
19155 Please remove and label this diskette, "Drive Image Boot Diskette--1 of 2".
19156 Please remove and label this diskette, "Drive Image Program Diskette--2 of 2".
19157 A previous version of Drive Image is not installed.\n\nTo install this upgrade, a previous version of Drive Image must be installed.
19158 CONFIG.SYS not found.
19159 Online Registration
19160 none entered
19161 Fujitsu MO Drivers
19162 ATAPI Support
19163 SCSI Support
19164 Selecting this component installs support for Fujitsu Magneto-Optical drives. Please select the correct drive type from the list at the right.
19165 Selecting this component installs support for Fujitsu ATAPI Magneto-Optical drives.
19166 Selecting this component installs support for Fujitsu SCSI Magneto-Optical drives.
19167 ATAPI Driver
19168 SCSI Driver
19169 Drive Image Trial
19170 Drive Image Pro Trial
19171 Drive Image - 30-Day Trial Version
19172 Drive Image Pro - 30-Day Trial Version
19173 pqi Image File
19174 In order to create this diskette it is necessary to transfer certain files to it. If you do not reformat this diskette, there will not be enough room for the necessary files. \n\nPlease reformat this diskette or insert a blank formatted 1.44 MB (3.5") diskette.
19175 Not Enough Room On Diskette
19176 You have either chosen not to format this diskette, or you have a bad diskette.\n\nYou will need to use a different diskette.
